1 5

Outrider TL Mini (Pre-Order)

Outrider TL Mini (Pre-Order)

$59.00 USD
$69.00 USD $59.00 USD
Sale Sold out
Taxes included.

Our smallest and lightest wireless tire pressure monitoring system designed for mountain and road tubeless tires. It mounts directly to your tubeless Presta valve stem and sends real time tire pressure to your mobile phone, Garmin, or Hammerhead. (valve must have a removable grommet)

Estimated Ship Date: June 2026

View full details
1 3

Key Features

  • Accuracy

    With an accuracy of ±2% and maximum pressure of 125 PSI, the TL Pro is built for any tubeless setup.

  • Battery Life

    The TL Mini features a battery life of 2,000 Ride Hours which last typical riders between 5-10 years.

  • Weight

    Weighing only 3.7 grams, the TL Mini keeps your wheels light and balanced.

1 3

What's In The Box

  • Two (2) Outrider TL Mini pressure sensors
  • 8 valve stem washers
  • Outrider sticker pack
  • Quick Start Guide
  • Fully recyclable box

Requirements

  • Rim Width

    We recommend symmetric rims be at least 19mm (internal width) and for asymmetric rims, 23mm is recommended.

  • Tire Setup

    Tires must be configured as tubeless, and run a pressure less than 125psi (13.7bar).

  • Valve Stem

    The valve stems used with the Outrider TL Mini must have a removable seal. If your unsure, check out our Outrider Tubeless Valves.

FAQ

Does the Outrider work with the Hammerhead Karoo headunit?

Yes! Our karoo extension is available via side loading to Karoo 2 and 3 devices and includes flat alerts. Download the extension here.

Will the Outrider fit on my wheels?

The TL Mini is designed to fit most modern tubeless setups, however exact fitment will depend on the bead width of your tire and symmetry of the rim. We recommend symmetric rims be at least 19mm (internal width) and for asymmetric rims, 23mm is recommended.

Does the Outrider work with Garmin headunits?

We have a companion Datafield for Garmin devices, which works on both head units and wearables (see our device compatibility list at the bottom of this page for details).

Are my tubeless valves compatible?

Virtually any tubeless valve with a removable seal will work with the Outrider, so long as it has enough length to be inflated after installation. The end of the valve will sit up to 5mm closer to the rim with the Outrider installed.

How does it work with tire sealant?

The core electronics of the Outrider are potted in aerospace-grade epoxy to protect them from contamination. The pressure transducer itself is covered by a highly chemically resistant membrane to repel tire sealant and keep the area clear.